Openvpn with fixed ips
Introduction
We already explored openvpn with dhcp...here we will have fixed ips without dhcp...here's the setting:
- isc-dhcp40-server
- bind95
- openvpn
with this setup we will be able to see the internal network from an external connection:
Setup
here's openvpn.conf:
ca /usr/local/etc/openvpn/keys/ca.crt cert /usr/local/etc/openvpn/keys/server.crt key /usr/local/etc/openvpn/keys/server.key dh /usr/local/etc/openvpn/keys/dh1024.pem # USE TAP ON SERVER AND CLIENT SIDE ! dev tap #ifconfig-pool-persist ipp.txt # replace 192.168.1.101 with the VPN IP server-bridge 192.168.0.1 255.255.254.0 192.168.0.2 192.168.0.250 keepalive 10 120 client-to-client verb 3 duplicate-cn push "route-gateway 192.168.0.1" push "dhcp-option DNS 192.168.0.1" # push DNS entries to openvpn client push "redirect-gateway" #redirect-gateway client-config-dir /usr/local/etc/openvpn/config
here's the content of a client config in /usr/local/etc/openvpn/config i named this file with the name of the certificate: port4 : that is needed so it will assign this ip to the owner of the port4 certificate
ifconfig-push 192.168.0.107 255.255.254.0
here's the content of /usr/local/etc/dhcpd.conf
option domain-name "workgroup"; ddns-update-style none; class "openvpn" { match if substring (hardware,1,2) = 00:ff; } subnet 192.168.1.0 netmask 255.255.255.0 { option routers 192.168.1.1; option domain-name-servers 192.168.1.1; pool { deny members of "openvpn"; allow unknown-clients; allow known-clients; ddns-updates off; range 192.168.1.100 192.168.1.199; } } host port4 { hardware ethernet 00:16:6f:b9:02:a4; fixed-address 192.168.1.107; }
here we match for mac address that starts by 00:ff,because tap devices do,and we assign them to the openvpn class... then we allow known and unknown clients but deny the right of the client's tap interface to get an ip in this range then at the end we assign an ip to a client...that makes the ports redirections easier
here's my bind configuration:
// $FreeBSD: src/etc/namedb/named.conf,v 1.26.4.1 2008/01/13 20:48:23 dougb Exp $ // // Refer to the named.conf(5) and named(8) man pages, and the documentation // in /usr/share/doc/bind9 for more details. // // If you are going to set up an authoritative server, make sure you // understand the hairy details of how DNS works. Even with // simple mistakes, you can break connectivity for affected parties, // or cause huge amounts of useless Internet traffic. options { // Relative to the chroot directory, if any directory "/etc/namedb"; pid-file "/var/run/named/pid"; dump-file "/var/dump/named_dump.db"; statistics-file "/var/stats/named.stats"; // If named is being used only as a local resolver, this is a safe default. // For named to be accessible to the network, comment this option, specify // the proper IP address, or delete this option. listen-on { 127.0.0.1; 192.168.0.1; 192.168.1.1; }; // If you have IPv6 enabled on this system, uncomment this option for // use as a local resolver. To give access to the network, specify // an IPv6 address, or the keyword "any". // listen-on-v6 { ::1; }; // These zones are already covered by the empty zones listed below. // If you remove the related empty zones below, comment these lines out. disable-empty-zone "255.255.255.255.IN-ADDR.ARPA"; disable-empty-zone "0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA"; disable-empty-zone "1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA"; // In addition to the "forwarders" clause, you can force your name // server to never initiate queries of its own, but always ask its // forwarders only, by enabling the following line: // // forward only; // If you've got a DNS server around at your upstream provider, enter // its IP address here, and enable the line below. This will make you // benefit from its cache, thus reduce overall DNS traffic in the Internet. /* forwarders { 127.0.0.1; }; */ /* * If there is a firewall between you and nameservers you want * to talk to, you might need to uncomment the query-source * directive below. Previous versions of BIND always asked * questions using port 53, but BIND versions 8 and later * use a pseudo-random unprivileged UDP port by default. */ // query-source address * port 53; }; // If you enable a local name server, don't forget to enter 127.0.0.1 // first in your /etc/resolv.conf so this server will be queried. // Also, make sure to enable it in /etc/rc.conf. // The traditional root hints mechanism. Use this, OR the slave zones below. //zone "." { type hint; file "named.root"; }; /* Slaving the following zones from the root name servers has some significant advantages: 1. Faster local resolution for your users 2. No spurious traffic will be sent from your network to the roots 3. Greater resilience to any potential root server failure/DDoS On the other hand, this method requires more monitoring than the hints file to be sure that an unexpected failure mode has not incapacitated your server. Name servers that are serving a lot of clients will benefit more from this approach than individual hosts. Use with caution. To use this mechanism, uncomment the entries below, and comment the hint zone above. */ zone "." { type slave; file "slave/root.slave"; masters { 192.5.5.241; // F.ROOT-SERVERS.NET. }; notify no; }; zone "arpa" { type slave; file "slave/arpa.slave"; masters { 192.5.5.241; // F.ROOT-SERVERS.NET. }; notify no; }; zone "in-addr.arpa" { type slave; file "slave/in-addr.arpa.slave"; masters { 192.5.5.241; // F.ROOT-SERVERS.NET. }; notify no; }; /* Serving the following zones locally will prevent any queries for these zones leaving your network and going to the root name servers. This has two significant advantages: 1. Faster local resolution for your users 2. No spurious traffic will be sent from your network to the roots */ // RFC 1912 zone "localhost" { type master; file "master/localhost-forward.db"; }; zone "127.in-addr.arpa" { type master; file "master/localhost-reverse.db"; }; zone "255.in-addr.arpa" { type master; file "master/empty.db"; }; // RFC 1912-style zone for IPv6 localhost address zone "0.ip6.arpa" { type master; file "master/localhost-reverse.db"; }; // "This" Network (RFCs 1912 and 3330) zone "0.in-addr.arpa" { type master; file "master/empty.db"; }; // Private Use Networks (RFC 1918) zone "10.in-addr.arpa" { type master; file "master/empty.db"; }; zone "16.172.in-addr.arpa" { type master; file "master/empty.db"; }; zone "17.172.in-addr.arpa" { type master; file "master/empty.db"; }; zone "18.172.in-addr.arpa" { type master; file "master/empty.db"; }; zone "19.172.in-addr.arpa" { type master; file "master/empty.db"; }; zone "20.172.in-addr.arpa" { type master; file "master/empty.db"; }; zone "21.172.in-addr.arpa" { type master; file "master/empty.db"; }; zone "22.172.in-addr.arpa" { type master; file "master/empty.db"; }; zone "23.172.in-addr.arpa" { type master; file "master/empty.db"; }; zone "24.172.in-addr.arpa" { type master; file "master/empty.db"; }; zone "25.172.in-addr.arpa" { type master; file "master/empty.db"; }; zone "26.172.in-addr.arpa" { type master; file "master/empty.db"; }; zone "27.172.in-addr.arpa" { type master; file "master/empty.db"; }; zone "28.172.in-addr.arpa" { type master; file "master/empty.db"; }; zone "29.172.in-addr.arpa" { type master; file "master/empty.db"; }; zone "30.172.in-addr.arpa" { type master; file "master/empty.db"; }; zone "31.172.in-addr.arpa" { type master; file "master/empty.db"; }; zone "168.192.in-addr.arpa" { type master; file "master/empty.db"; }; // Link-local/APIPA (RFCs 3330 and 3927) zone "254.169.in-addr.arpa" { type master; file "master/empty.db"; }; // TEST-NET for Documentation (RFC 3330) zone "2.0.192.in-addr.arpa" { type master; file "master/empty.db"; }; // Router Benchmark Testing (RFC 3330) zone "18.198.in-addr.arpa" { type master; file "master/empty.db"; }; zone "19.198.in-addr.arpa" { type master; file "master/empty.db"; }; // IANA Reserved - Old Class E Space zone "240.in-addr.arpa" { type master; file "master/empty.db"; }; zone "241.in-addr.arpa" { type master; file "master/empty.db"; }; zone "242.in-addr.arpa" { type master; file "master/empty.db"; }; zone "243.in-addr.arpa" { type master; file "master/empty.db"; }; zone "244.in-addr.arpa" { type master; file "master/empty.db"; }; zone "245.in-addr.arpa" { type master; file "master/empty.db"; }; zone "246.in-addr.arpa" { type master; file "master/empty.db"; }; zone "247.in-addr.arpa" { type master; file "master/empty.db"; }; zone "248.in-addr.arpa" { type master; file "master/empty.db"; }; zone "249.in-addr.arpa" { type master; file "master/empty.db"; }; zone "250.in-addr.arpa" { type master; file "master/empty.db"; }; zone "251.in-addr.arpa" { type master; file "master/empty.db"; }; zone "252.in-addr.arpa" { type master; file "master/empty.db"; }; zone "253.in-addr.arpa" { type master; file "master/empty.db"; }; zone "254.in-addr.arpa" { type master; file "master/empty.db"; }; // IPv6 Unassigned Addresses (RFC 4291) zone "1.ip6.arpa" { type master; file "master/empty.db"; }; zone "3.ip6.arpa" { type master; file "master/empty.db"; }; zone "4.ip6.arpa" { type master; file "master/empty.db"; }; zone "5.ip6.arpa" { type master; file "master/empty.db"; }; zone "6.ip6.arpa" { type master; file "master/empty.db"; }; zone "7.ip6.arpa" { type master; file "master/empty.db"; }; zone "8.ip6.arpa" { type master; file "master/empty.db"; }; zone "9.ip6.arpa" { type master; file "master/empty.db"; }; zone "a.ip6.arpa" { type master; file "master/empty.db"; }; zone "b.ip6.arpa" { type master; file "master/empty.db"; }; zone "c.ip6.arpa" { type master; file "master/empty.db"; }; zone "d.ip6.arpa" { type master; file "master/empty.db"; }; zone "e.ip6.arpa" { type master; file "master/empty.db"; }; zone "0.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "1.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "2.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "3.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "4.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "5.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "6.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "7.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "8.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "9.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "a.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "b.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "0.e.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "1.e.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "2.e.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "3.e.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "4.e.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "5.e.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "6.e.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "7.e.f.ip6.arpa" { type master; file "master/empty.db"; }; // IPv6 ULA (RFC 4193) zone "c.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "d.f.ip6.arpa" { type master; file "master/empty.db"; }; // IPv6 Link Local (RFC 4291) zone "8.e.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "9.e.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "a.e.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "b.e.f.ip6.arpa" { type master; file "master/empty.db"; }; // IPv6 Deprecated Site-Local Addresses (RFC 3879) zone "c.e.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "d.e.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "e.e.f.ip6.arpa" { type master; file "master/empty.db"; }; zone "f.e.f.ip6.arpa" { type master; file "master/empty.db"; }; // IP6.INT is Deprecated (RFC 4159) zone "ip6.int" { type master; file "master/empty.db"; }; // NB: Do not use the IP addresses below, they are faked, and only // serve demonstration/documentation purposes! // // Example slave zone config entries. It can be convenient to become // a slave at least for the zone your own domain is in. Ask // your network administrator for the IP address of the responsible // master name server. // // Do not forget to include the reverse lookup zone! // This is named after the first bytes of the IP address, in reverse // order, with ".IN-ADDR.ARPA" appended, or ".IP6.ARPA" for IPv6. // // Before starting to set up a master zone, make sure you fully // understand how DNS and BIND work. There are sometimes // non-obvious pitfalls. Setting up a slave zone is usually simpler. // // NB: Don't blindly enable the examples below. :-) Use actual names // and addresses instead. /* An example dynamic zone key "exampleorgkey" { algorithm hmac-md5; secret "sf87HJqjkqh8ac87a02lla=="; }; zone "example.org" { type master; allow-update { key "exampleorgkey"; }; file "dynamic/example.org"; }; */ /* Example of a slave reverse zone zone "1.168.192.in-addr.arpa" { type slave; file "slave/1.168.192.in-addr.arpa"; masters { 192.168.1.1; }; }; */ zone "workgroup" { type master; file "master/workgroup"; };
and here's my local "workgroup" file that lies in /etc/namedb/master/workgroup
$TTL 3600 ; 1 hour workgroup. IN SOA 192.168.1.1 admin.workgroup. ( 2008071102 ; Serial 10800 ; Refresh 3600 ; Retry 604800 ; Expire 86400 ; Minimum TTL ) ; DNS Servers IN NS 192.168.1.1 IN NS 192.168.1.1 ; Machine Names localhost IN A 127.0.0.1 router IN A 192.168.1.1 port4 IN A 192.168.1.107 ; Aliases www
basically i followed the comments in the file and have set-up a slave... i've also changed on what interface it listen...